|
We will be posting our burners in the next few weeks.
U Burners,
Pipe Burners,
Fire Ring Burners,
Stainless Steel and Steel,
Pan Burners,
Trays Burners,
Propane Burners,
Here are a few burner rings and their pricing
 
 
 
Here is a retail cost sheet of all of our fire pit ring burners,
steel
stainless
single
double
triple
|
12” steel we
|
48.50
|
|
12” stainless we
|
116.00
|
|
12” steel double d
|
60.00
|
|
12” stainless dbl d
|
121.25
|
|
18” steel we
|
68.00
|
|
18” stainless we
|
151.00
|
|
18” steel double h
|
69.25
|
|
18” stainless dbl h
|
126.00
|
|
19” steel double d
|
95.25
|
|
19” stainless dbl d
|
135.00
|
|
22” steel double we
|
81.50
|
|
22” stainless dbl we
|
173.00
|
|
24” steel double we
|
98.00
|
|
24” stainless dbl we
|
208.00
|
|
30” steel double we
|
114.00
|
|
30” stainless dbl we
|
240.00
|
|
30” steel triple h
|
204.00
|
|
30” stainless triple h
|
313.75
|
|
36” steel double we
|
134.50
|
|
36” stainless dbl we
|
288.50
|
|
36” steel triple h
|
274.00
|
|
36” stainless triple h
|
296.00
|
|
12” x 9” stainless d
|
152.70
|
|
18” x 15” stainless d
|
219.20
|
|
24” x 21” stainless d
|
283.20
|
These can be purchased in the E Store, Click here!
These are our new propane burners for fire pits with use with PROPANE.
They are as follows:
18" pan with a 12" burner
24" pan with a 18" burner
30" pan with a 24" burner
The remote box has an electronic (battery) starter and a variable fuel valve. Propane must be mixed with air (air mixer valve/ venturi) to insure a clean bur without soot! If you burn straight propane you will experience black smoke/ soot and this is not good. We have worked on the development for several months now on these burners and they are now ready for you.
The picture on the lower left is of a possibility for the new burners. You can mount these into any table. With this in mind when we designed these we wanted the customer to be able to build or design any base, table or fire pit to install a propane burner.
The picture on the right is of the bottom side of the control box.
 
The left picture is of the control box with the air mixer. The picture on the right is of the ring and base plate which prevents the propane from sinking.
 
Below on the right are the thermo-coupler and electronic starter. The thermo-coupler is the safety switch which if the fire is blown out and leaving the thermo-coupler cold will shut your system off for safety reasons.
 
Here are the first pictures of our propane pan burners and more details will follow.
 
We will be posting on the new generation of propane pan burners.
These burners cone in 18", 24" and 30". When ordering please specify if the connector is on the left or right side.
with remote (optional) The pictures of the remote control will follow in the days to follow.
Our propane Fire Pit burners come in 2 sizes, 12" and 24".
This is a 24" ring on a 30" base. The base is detached for remote locating.
We are taking order for the burners as they are being built as ordered. Manufacturing time is about ten days and they ship the same day as of completed.
Here are a few pictures until we get situated:
24" U Burner
 
This is a double 24" u burner creating a 48" burner.
Just a 24" u burner
24 x 30 burner
24 x 24 burner
 
This is our tray burner which will be available in 18", 24" and 30" soon.
 
 
The pictures below are of a trapezoid pan burner with legs.
Here is a pan burner
Propane Burners air intakes:
 
When you are using propane you must have an air intake along with other safety devices.
We will be posting out new propane burners on line in the next few weeks as we find the time. Propane burners need a thermo coupler and a safety pilot light kit for safety reasons.
The pictures above and below are just showing the air intake and safety valves and other pictures will follow soon.
 
We will be posting our ring burners in steel and stainless steel.
This is a 120" burner.
We found a use for your replaced logs!
The custom fireplace below has a star burner and a very nice star opening
From the start......
to the finish
Very modern. The fireplace above has Gray, Gray Reflective, Black, and Black Reflective
The pan burner below is for a 2 sided fireplace and this pan is 25" x 45" and controlled from only one side. It is constructed from 16 gauge brushed stainless steel with 3" x 3" x 3" corner legs.
 
 
The picture on the bottom left shows you the thermo-coupler and safety pilot light kit which are UL and CSA approved.
 
 
This is one side of the two sided fireplace and we will post pictures when the glass is installed of both sides.
 
Below are some of our fireplace burners in all sizes and in all stainless steel for outdoors!
 Double burner on
  Triple Burners
  H Burners
  Double H Burners
  Triple H Burners
To see pricing just click here!
The fire pit below has a half round 4 piece stainless steel ring custom made to fit the shape of the fire pit.
 
Below is a 36" aluminum pan burner for propane with a 3" outside lip. These can be made to fit any fire pit, fire table of fire fit for natural gas or propane. We can build anything! This pan has a thermo-coupler for safety and air mixer built in to eliminate soot.
   
This is our latest venture and the first ones will be installed in a month or so. We will be posting pictures of the completed project. These are very futuristic Tiki Torches if that's what you would like to call them, enjoy.
 
 
 
 This last one looks like Wilma Flintstone?
What we have done is create a vortex and added fire! These will be made available in all sizes, colors and shapes. Stay tuned for more installation pictures!
Ed
Our newest line of burners are the star burners available in 12", 18" 24" and 30" in stainless steel and steel
30" star
 
24" star
 
 
12" star
 
These are also made in custom sizes as well. If you dream it, we can make it! These can be made with a base or with out. The can be made for propane or natural gas.
The Sticks below are a pro-to type of 2 sets that are being installed in Nipomo California in the Trilogy project by Shea Homes (Pismo Beach). We will follow up with completed pictures as soon as we have time to post the finished project. There are several fireplaces which will also be all electronic ignition as well
At the base of each burner there is a control valve to regulate the flow of fuel to the burner. The base will be covered with our black sand to conceal the valves. We will post pictures of the finished and completed project.
The vent less burner below is 1 of 3 that were sent to Georgia. The glass that we tested was multi mix. We show the burner finished, with the burners exposed, burning and with glass, We will post the pictures of the finished fireplace when the customer send them to us to post. This is a propane vent less burner and these also are made in natural gas as well.
Notice the stainless box tray underneath the upper pan.
If you dream it, design it, think of it, we can build it as we are the innovators in the industry which seem to some how give licence for most to try to copy us and our products and designs. What is important that you know who we are!
The vent less burner below is made of steel and there were actually 4 of these made. We covered the front and sides with 5" skirts. There are being installed in Georgia and as soon as they send pictures we will post them These pictures were taken just after the testing. This is a propane vent less burner and these are available in natural gas as well.
The pictures below are of the same burner as above with Azurlite installed. These 4 vent less burners are being installed in Georgia.
The skirts will hide the the valves and the remote control will be moved to the side of the fireplace. This was a vent less burner the customer sent to us for conversion and they asked for us to add a remote to all 4 vent less burners.
The burner below is installed in San Diego California. This is a 4 burner stainless steel custom. It is turned on by 4 valves and measures 72" across which is in an 84" fire pit. We will post pictures of the finished project when we finish it.
We will show you all four burners burning and we will also have the pictures and location for you of the finished project as soon as we can. As we have said before, there is nothing we can't do or build!
The flat pan below has a propane burner installed for a fire pit. These are made in any size, shape or burn pattern. The one shown below is an electronic ignition control and these can be adapted with manual ignition as well. This was build for a designer in New York and placed on a shelf of the fireplace.
The pan burner below is a stainless steel/ propane pan for outdoors and we have installed an electronic ignition under the pan. These can also be made for natural gas.
The table below was built for Jim Shaw in Riverside California. The stainless steel tray with stainless steel burners was build to Jim's specs. We used bronze glass, bronze reflective glass and pink diamonds.This was a natural gas burner and could be easily converted to propane.
The fire pit below is a failed attempt of a propane conversion without our help in the beginning. You can't just burn propane! If you try this, this is what it will look like. You need to calibrate the amount of air to propane or it will back fire, burn black or explode! We recommend a thermo coupler, air mixer/ venturi along with several other important factors. We won't tell you who tried this but we will tell you we did fix the issue and now the customer is very happy. We did use azurlite with azurlite reflective.
 
 
 
 
 
 
_________________________________________________________
Click HERE or on the picture below to see how this was made
_________________________________________________________
|
